View more images

Product details

S = Steering Angle Sensor (SAS) functions also offered European Makes: Abarth (S) Alfa Romeo (S) Audi (S) Bentley (S) BMW (S) Bugatti (S) Citroen (S) Dacia Fiat (S) Ford Europe Jaguar (S) Lancia (S) Land Rover (S) Maserati (S) Maybach (S) Mini (S) Mercedes Benz (S) Opel (S) Peugeot (S) Porsche Renault (S) SAAB Seat (S) Skoda (S) SMART Sprinter Vauxhall (S) Volkswagen (S) Volvo

Asian / Australasian Makes: Acura (S) Daewoo Ford Australia Honda (S) Holden Australia Hyundai Infiniti (S) Isuzu Kia Lexus (S) Mazda Mitsubishi (S) Nissan (S) Perodua Scion (S) Subaru (S) Suzuki (S) Toyota (S) American Makes: Chrysler (USA only) (S) Ford USA GM USA (S) GM Brazil

Features

• ABS and Airbag (SRS) coverage for over 50 American, Asian and European vehicle makes
• Compatible with 2013/2014 models on most makes
• Read and clear ABS and SRS fault codes
  (Please note this unit will NOT clear "crash data", so it cannot clear permanent fault codes where the airbag system has detonated)
• Read live sensor data
• Merge live data graphs for easier fault diagnostics
• Perform bi-directional control tests, such as ABS motor test, actuator tests etc.
• EOBD engine management coverage for all* UK 2001+ petrol and 2004+ cars
• Unparalleled EOBD / OBD-II functionality - supports ALL 5 OBD-II protocols and ALL 9 test modes
• Easy-to-use with intuitive menu-driven operation
• 4.3 inch TFT colour display (480 x 272 pixels)
• Strong housing tough enough to survive the workshop
• FREE Lifetime Software Updates after registration

(* - EOBD engine management coverage applies to passenger cars with fewer than 10 seats and a Gross Vehicle Weight rating of less than 2500kg, registered from new within an EU member state since 2001 for petrol cars and 2004 for diesel cars)

Package Contents

• Foxwell NT630 ABS & Airbag Reset Tool
• 1.5m OBD connection cable (16-pin EOBD/OBD-II connector)
• USB cable (to power up tool when not plugged into a car)
• Printed instruction manual
• 8GB SD Card (inside tool)
  (tools sold before June 2016 were supplied with a 4GB card)
• Tough plastic carry case

Product comparison

Are you confused by the different features and coverage of the Foxwell tools?

If so, please click here to go to our Foxwell Tool Chooser.

This is a page where you simply select the region of car manufacturers you want to cover (e.g. Europe, Asia), and we'll show you the suitable tools and what each tool offers.

Software updates

This tool comes with free software updates for 18 months from the date of purchase.
To apply software updates to the tool you will need a Windows PC/Laptop and an SD Card Reader.
If we have sufficient time between your order being placed and being shipped, we will often install the latest available updates for you on the day the order is shipped.

Registration part 1 - Create an account

You firstly need to create an account with Foxwell and register your tool.
This can be done through the FoxScanner update software, which can be downloaded for free from the Foxwell UK website.
Just select your tool from the list on the Foxwell UK Updates page and follow the instructions to download the latest version of FoxScanner.

The file downloaded will be a compressed zip file. Open that file and run the installer inside it.
Please note: The installer will sometimes try to install FoxScanner to the D:\ drive. In most cases you will need to change this to C:\

Once installed, open the FoxScanner software.
Click the Register button and complete the registration page to create your Foxwell account.

Registration part 2 - Add your tool to the account

To register the tool, you will need the tool's Serial Number and 'Register Password'.
You can find these on the tool by selecting Setup > About.

When logged into FoxScanner, click the 'Register Products' icon.
On the 'S/N Registration' tab, put a tick in the box marked '001' then select your tool in the Part Number column.
Enter the product's serial number and password, then click Submit.
A confirmation box should be shown confirming successful registration.

Updating your tool

Now close the FoxScanner software, remove the SD card from your tool (making sure the tool is turned off first!) and connect it to the PC via an SD card reader.
Once Windows has detected the SD card, run the FoxScanner software and login again. click the 'My Updates' button.
After a few seconds, a list of the available software updates will appear.
Ensure that the correct serial number is displayed in the drop-down list.
Click the Update button to download and install available updates.

Please note: the update process can take a long time. If your tool has not been updated recently, it may take a few hours for the update process to complete. Once the update has completed, don't forget to 'safely remove' the SD card in Windows before unplugging it, to avoid the possibility of data corruption.

Renewals

Once your initial 18 months of free updates expire, the tool will continue to function - it will not 'time out' - but you will no longer be able to access the update server.
Should you wish to continue updating your tool, you will need to purchase an update package, which will give you a further 12 months of access to the update servers.

Product reviews

No reviews have been submitted for this product yet.

If you've already purchased this product, you can submit the first review here!