Product details

Electronic Parking Brake, Oil Service, Battery Registration, DPF and more in one tool!

In addition, the NT650 Elite offers enhanced diagnostic coverage (fault codes, live sensor data, and some component actuations) for ABS and Airbag systems on over 60 makes of car.
The tool also features a comprehensive EOBD / OBD-II mode, to offer engine management fault code reading and live data from any EOBD compliant car (all* petrol cars from 2001 onwards, diesel cars from 2004 onwards).

Features include

ABS & Airbag Diagnostics

• Read and clear fault codes
• View live sensor data
• Manually actuate components

Service Light Reset

• Resets Oil Service Light
• Resets Oil Inspection Light
• Sets Inspection Service Interval (1 & 2)
• Sets Inspection Mileage
• Provides on-screen service reset instructions for many vehicles which do not support electronic service resets

Electronic Parking Brake

• Deactivates and re-activates brake control system
• Retracts calipers for brake pad replacement
• Advances calipers after servicing to the original position, without affecting current calibration
• Reads and clears trouble codes (fault codes)
• Turns off brake warning light
• Initializes the wear indicator if required when new pads installed
• Diagnoses EPB/SBC caliper functionality
• Resets the brake pad thickness after service on Audi A8
• Performs ECU controlled brake fluid change

Diesel Particulate Filter

• Forced regeneration of DPF
• DPF replacement function to register a new filter with the car

Battery Configuration

• Allows configuration of replacement battery - required on many new European vehicles
• Supports all brands of battery

Diesel Particulate Filter (DPF) Functions

• Allows forced regeneration of DPF on certain models

TPS Functions

• Allows configuration/calibration of TPS on vehicles

General Features:

• Compatible with 2017/2018 models on most makes
• Shows ECU information
• EOBD engine management coverage for all* UK 2001+ petrol and 2004+ cars
• EOBD / OBD-II functionality - supports ALL 5 OBD-II protocols and ALL 10 test modes
• Read EOBD / OBD-II live sensor data
• Merge live data graphs for easier fault diagnostics
• Easy-to-use with intuitive menu-driven operation
• Large TFT colour display
• Strong housing tough enough to survive the workshop
• FREE Lifetime Software Updates after registration

(* - EOBD engine management coverage applies to passenger cars with fewer than 10 seats and a Gross Vehicle Weight rating of less than 2500kg, registered from new within an EU member state since 2001 for petrol cars and 2004 for diesel cars)

Package Contents

• Foxwell NT650 Elite Multi-Application Service Pro Tool
• 1.5m OBD connection cable (16-pin EOBD/OBD-II connector)
• USB update cable
• 16GB Micro-SD Card (inside tool)
• Tough plastic carry case

Software updates

NT650 Elite scan tools come with free 'lifetime' software updates!
(All the time the tool is manufactured or supported, updates will be free).

To apply software updates to the tool you will need a Windows PC/Laptop and an internet connection.
To register the tool you will also need access to your email account.
If we have sufficient time between your order being placed and being shipped, we will usually install the latest available updates for you on the day the order is shipped.

Registration part 1 - Create an account

You firstly need to create an account with Foxwell and register your tool.
This must be done through the FoxAssist update software, which can be downloaded for free from the Foxwell UK website.
Just select your tool from the list on the Foxwell UK Updates page and follow the instructions to download the latest version of FoxAssist.

The file downloaded will be a compressed zip file. Open that file and run the installer inside it.
Please note: the installer will also install a Microsoft Visual C++ runtime - this is required for the software to run. It may require a Windows restart after installation before first use.

Once installed (following a Windows restart if required), open the FoxAssist software, and click the Register button.
Then on the registration form:

• Fill in your email address and your choice of password.
• Then press the 'Send Code' button, and wait for a confirmation message.
  This will immediately email you a verification code (valid for 10 minutes) to confirm the email address is correct.
  ** Do NOT press the Send Code button more than once, as each press generates a new code, invalidating the previous one - it may take up to 10 seconds for the confirmation message to appear **
• Check your email for that code, enter it, then click the Free Registration button to complete registration.
• Once the details are accepted you will be returned to the main screen.
• Enter your email address and password, then click 'Sign In'.

Registration part 2 - Add your tool to the account

• Connect the tool to your PC using the supplied USB cable.
• Once the Main Menu has loaded, select the 'Update' option on the tool.
• The tool will enter update mode, and Windows should now see it as a 'USB Drive'.
• In the FoxAssist software on the PC, the tool's serial number should now have been detected and will be displayed in the top-right corner.
• Select the 'Activation' tab on the left side.
• The tool's serial number should be displayed at the top of the page, next to an 'Activation' button.
• Press the Activation button to activate the tool and register it to your account.
• A 'successful activation' confirmation message should be displayed, then the tool's serial number will move to the 'Activated' section.
• Now close the FoxAssist software.

Updating your tool

• To update your tool, connect it via the USB cable and select the 'Update' mode as before.
• Once Windows has detected the SD card drive, run the FoxAssist software and login again.
• The software should automatically detect the tool and show you a list of installed software.
• Any available updates will already be ticked (if none can be ticked, you are up to date!)
• Click the Upgrade button to download and install available updates.
• When all updates are installed, close FoxAssist, then press the 'Enter' button on the tool to return to the Main Menu.
• You can now disconnect the USB cable.

Product reviews

No reviews have been submitted for this product yet.

If you've already purchased this product, you can submit the first review here!